TL series Titanium Stick Filtrator
Introduction:
The titanium rod filtrator uses titanium powder final sintered filtrator element, normally it is used as rough filtration or intermediate filtration. The filtrator core has many advantages such as high accuracy, high temperature resistance, corrosion resistance, high mechanical strength, etc, so it is widely used at pharmaceutical industry, the outer cover is SS316L or SS304 material, meets GMP requirements.
Application:
As the filtrator has characteristics like high pressure, strong acid resistance, strong alkali resistance, corrosion resistance, filtering core can be used repeatedly, it adopts powder metallurgy method to make the titanium powder into hollow filter pipe by high temperature, it is widely used at food, beverage, pharmaceutical, chemical industry, at pharmaceutical industry, it is especially appropriate for infusion solution and injection production line, to make the decarbonization filtration.
Usage caution:
- Avoid scratch and collide, the dust and oil pollution
- During the usage, the working pressure should not be higher than rated pressure.
- During the usage, there should be at least 3-5 minutes low pressure starting time, the relative pressure difference should be lower than 0.5MPa, then adjust the working pressure to the pressure needed(the highest pressure should not be higher than 0.4MPa)
- After a period time of usage, during the block of filtering element, the pressure goes higher and the flow goes slower, should backlash or backwash it.
Warranty: One year after receiving equipment, offer life long after sale service.
Installation and commissioning: We can send professional engineer to install and commission the equipment.
Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 24 hours except the special reasons.
Inspection: the third party inspection company or yourself to inspect the products before shipment.
Documentation: User manual, Maintenance manual, Equipment test report, etc.
FAQ:
1. Are you a factory or trading company?
We are a factory
2. How long is the warranty period?
One year
3. What's the main market of your company?
We have customers all over the world
4.What's your delivery time?
Normally it is around 30 days, the exact time depends on product type and quantity.
5. What's the payment terms?
TT, LC, etc
6. Can we visit your factory?
Welcome to visit our factory!
7. Where is your factory? How can we go there?
Our factory locates at Wenzhou city, Zhejiang Province, who is very near the airport, you can take the plane to Wenzhou airport and we will go to airport to pick up you.
Audited Supplier 
){kind=link}